manualshive.com logo in svg

Stryker EPIC II, Руководство по обслуживанию

Поделиться
Скачать
Stryker EPIC II Скачать руководство пользователя страница 61

Return To Table of Contents

www.stryker.com

2030-809-002 REV D

61

POWER SUPPLY REMOVAL AND REPLACEMENT

Tools Required:

• 

T27 Torx

• 

Needle-Nose Pliers

Procedure:

1.  Run the litter to the full up position and remove the mattress from the bed.
2.  Fold the foot section back toward the head end of the bed. Electrically run the knee section to full up. If the knee 

section will not move electrically, pull the foot section toward the head end of the bed while pulling the CPR release 
handle (located at the head end of the bed). The knee section will raise.

3.  Using a T27 Torx, remove the four screws holding the cover to the actuator box and remove the cover.
4.  Properly ground yourself (Refer to Static Protection Procedure).
5.  Unplug all electrical connections from the power supply.
6.  Using needle-nose pliers, squeeze the four stand off supporting the power supply and pull up gently on the power 

supply to remove it.

7.  Reverse steps 2 through 5 to install the new power supply.
8.  Verify the bed is working properly before returning it to service.

Service Information

Содержание EPIC II





































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды