manualshive.com logo in svg

Stryker BERTEC GOBED PLUS FL20E, Руководство по эксплуатации

Поделиться
Скачать
Stryker BERTEC GOBED PLUS FL20E Скачать руководство пользователя страница 7

 

Introduction 

Chapter 1 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

1.5  WARRANTY 

LIMITED WARRANTY

 

All Stryker Bertec products are guaranteed against material or manufacturing defects, improper 
operation of mechanisms, and premature wear of bed components under normal use 
conditions. 

For questions regarding warranty, please contact Stryker Bertec Technical Service department 
(see section 1.2) or your local representative. 

TO OBTAIN SERVICE AND/OR PARTS

 

For an on-site diagnosis of a malfunction a Field Service Representatives or to order 
replacement parts, simply contact our Service department (see section 1.2) or your local 
representative. For the part ordering procedure, refer to section 1.5 of the bed maintenance 
manual, “To Obtain Service and/or Parts”. 

RETURN AUTHORIZATION 

Merchandise cannot be returned without approval from the Stryker Bertec Technical Service 
department. An authorization number will be provided, which must be clearly printed on the 
returned merchandise. Stryker Bertec reserves the right to charge shipping and restocking fees 
on returned items. 

DAMAGED MERCHANDISE 

Claims for damaged merchandise must be made with the carrier within fifteen (15) days of 
receipt of merchandise. DO NOT ACCEPT DAMAGED SHIPMENTS UNLESS SUCH DAMAGE 
IS NOTED ON THE DELIVERY RECEIPT AT THE TIME OF RECEIPT. Upon prompt 
notification, Stryker Bertec will file a freight claim with the appropriate carrier for damages 
incurred. Claims will be limited in amount to the actual replacement cost. In the event that this 
information is not received by Stryker Bertec within the fifteen (15) day period following the 
delivery of the merchandise, or the damage was not noted on the delivery notice at the time of 
receipt, the customer will be responsible for payment of the original invoice in full. 

Claims for any short shipment must be made within 5 days of invoice. 

1.6  SYMBOLS 

 IPX4

      Protection from liquid splash

 

Type B Equipment 

∼

 

Alternating Current 

Warning, consult accompanying documents 

10A 125V

Fuse rating for bed with the 100V

∼

 and 120V

∼

 electric 

systems 

6.3A 250V

Fuse rating for beds with  200V

∼

, 220V

∼

 and 240V

∼

 

electric systems 

Protective earth (ground) 

Содержание BERTEC GOBED PLUS FL20E























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды