manualshive.com logo in svg

Stryker BERTEC GOBED PLUS FL20E, Руководство по эксплуатации

Поделиться
Скачать
Stryker BERTEC GOBED PLUS FL20E Скачать руководство пользователя страница 12

GO

BED

+ 

Operations Manual 

 

12

2.  OPERATION GUIDE

 

2.1  SWITCHING ON POWER 

The bed is equipped with a main power switch located at the head end of the bed where the 
power cord connects to the bed. Turn it on to activate the bed functions. When the bed power 
switch is turned off or in the event of a power failure, the settings of the lockout controls and the 
optional Weigh and/or Bed Exit calibration data are preserved.

 

2.2  APPLYING THE BRAKES

 

The bed is equipped with a central locking system activated by a pedal (see page 11, “Bed 
Illustration”) located at the midpoint of the bed on both sides. 

 

 

Always apply the brakes when a patient is on the bed (except during transport) or when 
entering/exiting the bed. Serious injury could result if the bed moves while a patient is getting on 
or off the bed. After the brake pedal is engaged, push on the bed to ensure the brakes are 
securely locked. 

Brake Pedal Operation 

To 

engage

 the wheel brakes, fully depress the red “TOTAL BRAKE” side of the brake/steer 

pedal at either side of the bed. 

To 

disengage

 the wheel brakes, toggle the pedal to the neutral position. 

2.3  MOVING THE BED

 

The bed is equipped with a fifth steer wheel activated by a pedal (see page 11, “Bed 
Illustration”) located at midpoint of the bed on both sides. 

The fifth steer wheel helps guiding the bed along a straight line and helps the bed pivot around 
corners. 

 

 

To reduce risk of injury, ensure the sleep surface is horizontal and in the lowest position with the 
siderails fully raised and locked when moving the bed with a patient in it. 

To avoid injury to the patient and/or user, do not attempt to move the bed laterally with the steer 
pedal engaged. The fifth steer wheel cannot swivel. 

To avoid damage to the siderail mechanisms, do not move the bed using the raised siderails. 
Use the push/pull handles integrated to the boards to move the bed.

 

Steer Pedal Operation 

To 

engage

 the steer mode, fully depress the green “AXIAL STEER” side of the brake/steer 

pedal at either side of the bed. 

To 

remove

 the steer mode, toggle the pedal to the neutral position. 

W

W

A

A

R

R

N

N

I

I

N

N

G

G

 

 

W

W

A

A

R

R

N

N

I

I

N

N

G

G

 

 

Содержание BERTEC GOBED PLUS FL20E























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды