Stryker 2100, Руководство по обслуживанию

Страница: 3 / 63

Introduction
2
INTRODUCTION
This manual is designed to assist you with the maintenance of the 2100 Childbearing Bed. Read it thoroughly
before using the equipment or beginning any maintenance on it.
SPECIFICATIONS
Maximum Weight Capacity 300 pounds (135 kilograms)
Electrical 3 motor function: Head–Bed–Foot
6 function patient comfort
120 VAC, 60 Hz, 4 Amp – 105 to 135 VAC operating range.
Current leakage less than 100 microamperes.
Hospital grade plug and 3–wire heavy duty cord.
Compatible with non–flammable anesthetic agents and oxygen by na-
sal catheter or mask.
WARNING
The 2100 is equipped with a hospital grade plug for protection against shock hazard. It must be plugged di-
rectly into a properly grounded three–prong receptacle. Grounding reliability can be achieved only when a
hospital grade receptacle is used.
WARNING / CAUTION / NOTE DEFINITION
The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed.
WARNING
The personal safety of the patient or user may be involved. Disregarding this information could result in injury
to the patient or user.
CAUTION
These instructions point out special procedures or precautions that must be followed to avoid damaging the
equipment.
NOTE
This provides special information to make maintenance easier or important instructions clearer.
To assure its proper use and the safety of patients and staff, the 2100 has been marked with the following
caution and warning labels:
DANGER Explosion Hazard – do not use in the presence of flammable anesthetics.
CAUTION This unit is equipped with a hospital grade attachment plug. Grounding reliability can be
achieved only when equipment is connected to equivalent receptacle.
CAUTION Electrical shock hazard. Do not remove cover panels. Refer all servicing to qualified personnel.
CAUTION Disconnect power cord before hand cranking. Remove hand crank before connecting power
cord.