Service Information
15
SIDERAIL LATCH REPLACEMENT
Required Tools:
3/8” Drive Ratchet
T40 Torx Bit
1.
Using the foot pedal, raise the litter to maximum height.
2.
Remove the two bolts (A) holding the siderail latch (B) to the litter frame and discard the bolts and latch.
3.
Using the new bolts provided in the kit, install the new siderail latch.
4.
Verify proper latching and unlatching of the siderail before returning the stretcher to service.
LITTER CORNER COVER REPLACEMENT
Required Tools:
Drill w/ 1/4” Bit
T25 Torx
Utility Knife
1.
Drill out the rivet holding the IV pole and/or push handle in the socket and remove the IV pole/handle from
the socket.
2.
Using a utility knife, pry off the three hole plugs in the top of the cover.
3.
Using a T25 Torx, remove the 3 screws holding the top and bottom covers together and pull apart the
cover.
4.
Reverse to install the new cover.
Return to Table of Contents
Back to Table of Contents