Struers ProntoPress-10, Инструкция по эксплуатации

Страница: 55 / 208

ProntoPress-20
Instruction Manual
49
8. Technical Data
Specifications Subject
Metric/International US
Mounting Units
(Optional)
Diameter 25, 30, 40, 50 mm 1 ¼", 1½"
Force on piston rod Preheating:
0-20 kN in steps of 5
kN
0-2000 kp in steps of
500 kp
Heating:
0 - 50 kN in steps of 5
kN
0 - 5000 kp in steps of
500 kp
Preheating:
0 - 5000 Lbf in steps of
1000 Lbf
Heating:
0 - 12000 Lbf in steps
of 1000 Lbf
Compression
Pressure in mounting
cylinder The pressure range is
dependent on the
cylinder diameter:
Preheating:
0-10 to 40 MPa in
steps of 2.5 to 10 MPa
0-100 to 400 bar in
steps of 25 to100 bar
Heating:
0-25 to 100 MPa in
steps of 2.5 to 10 MPa
0-250 to 1000 bar in
steps of 25 to 100 bar
The pressure range is
dependent on the
cylinder diameter:
Preheating:
0-1500 to 6000 psi in
steps of 250 to1000 psi
Heating:
0-3750 to 15000 psi in
steps of 250 to 1000
psi
Temperature 100 - 180 °C in steps of
10 °C 212 - 356 °F in steps of
18 °F Preheating
Time 0:30 - 15:00 min in steps of 0:30 min
Temperature Process:
100 - 180 °C in steps of
10 °C
Manual heating:
30 - 60 °C in steps of
10 °C
Process:
212 - 356 °F in steps of
18 °F
Manual heating:
86 - 140 °F in steps of
18 °F
Heating
Time 0:30 - 15:00 min in steps of 0:30 min