Struers Discotom-60, Инструкция по эксплуатации

Страница: 17 / 258

Discotom-60 /-65
Instruction Manual
13
When the Discotom is started for the first time, a screen display
prompts selection of a preferred language.
To change the language:

From the CUTTING menu, press MENU

button once to
select CONFIGURATION Menu.


Turn knob to navigate between parameters in the
CONFIGURATION Menu.


Push knob to select LANGUAGE. A pop-up menu
appears.


From the pop-up menu, select your preferred language
and enter the setting by pushing the knob.


Press ESC button to move from CONFIGURATION Menu
to Cutting menu.
The Y-table is a motor driven, movable table. Using the joystick (see
“Control Panel Functions”) the table can be moved backwards and
forwards. The Y-table is especially useful for cutting wide
workpieces.
Setting the Language
Moveable Table
Y-Table
Note :
When Discotom is switched on, the cutting table will move to the front
reference position (the latest position of the cutting table).
However, when Discotom has been switched on and off 10 times, the
cutting table will firstly move to the front of the cutting chamber and then to
the back. This automatic movement helps keep the two guide shafts free of
cutting swarf.