7
MAINTENANCE FUNDAMENTALS
Light Fixtures
Light fixtures are located on the sides of
each door assembly, both sides (just in-
side doors).
•
Open the door all the way.
•
Access lamp by removing the lamp
cover/diffuser.
•
Apply gentle squeezing pressure to
lamp cover; rotate to release
cover.
Removal of lamp:
•
Press bulb down until top contacts are
clear of the upper socket.
•
Tilt top of bulb away from the upper
socket and lift bulb out.
•
Replace bulb by performing this opera-
tion in reverse order.
•
See light assembly illustration below
right.
Light Ballast Access and Field Access
Box Access
•
Disconnect electrical power from case.
•
Flip Down the Front Panel / Storage
Door (see front case illustration at right
and rear case illustration below).
Bulb
Lamp Cover
Lower Socket
with Spring
Light Assembly
Ballast
Box
Front Panel /
Storage Door
Field
Access
Box
Field
Access
Box
Ballast
Box
