6
MAINTENANCE FUNDAMENTALS
Shelf Assembly Removal
•
Shelves can be removed for repositioning,
removal (for individual merchandising re-
quirements) and cleaning.
•
Slide the front shelf support back rotate up
and lift straight up to separate from brackets.
•
Slide the rear shelf support back rotate up
and lift straight up to separate from brackets.
•
Remove brackets. Note it may be necessary
to remove the nylon shipping bracket re-
tainer. Pliers will be required to accomplish
this task.
Removing of Decking
•
Remove lower shelf assembly.
•
Remove interior deck by pushing up from
underneath in the bag storage area.
Door “Hold Open” Feature
To reposition the shelving or restock the
shelves, it is first helpful to use the door ‘hold
open” feature.
•
Open the door all the way (See light fixture).
•
Caution damage will result if pin is not
lowered before attempting to close the
doors.
•
Inside the unit, at the top of each door
hinge, is the pin slide cover.
•
Slide the pin cover up until the pin extends
approximately 1/2 inch above the door hinge.
•
Release the door assembly allowing the pin
to rest on the outer door frame.
•
To close, fully open the door and retract the
pin into the hinge and allow the door to
close.
Front Shelf Support
Rear
Shelf
Support
Shelf Bracket
Bracket
Retainer
Bracket
Retainer
Pin
Extension
