Page 6 of 17
Wear ANSI Z871. Compliant safety goggles.
Do not exceed the rated capacity.
Use on a hard level surface.
Use an adequate amount of lubricant while mounting and dismounting tire. Be sure that the bead
is in the center of the rim during this process.
No alterations shall be made to this product.
Only attachments and/or adaptors supplied by the manufacturer shall be used.
Not for use by or around children.
Assembly Instructions
1. Bolt the long leg (#1) to the center post (#3) with bolts (#11), nuts (#12), lock washers (#13), and
flat washers (#14).
2. Bolt the two short legs (#2) to the long leg base with bolts (#11), nuts (#12), lock washers
(#13), and flat washers (#14).
Note:
The user can bolt the manual tire changer to the floor with the four provided holes.
