Page 10 of 17
3. Insert the flat end of the mount /demount bar (#10) into the casting pipe (#4). Set the shovel (#7)
on the tire against the edge of the rim. As you work with different sized tires you may need to
adjust the shovel height. Adjust the shovel height by removing the pin and moving the shovel
(#7) to the appropriate height and reinserting the pin.
4. Push down on the mount/demount bar forcing the bead off the rim. If the bead does not come
off all at once, turn the tire and try again in several different locations.
5. Turn the tire over and repeat.
Demounting and Mounting Tires
1. After the bead is broken, place the tire up on the machine with the valve stem facing up and the
lug pin sticking up through the lug hole of the rim.
