2
Thank you very much for choosing a Strongway product! For future reference, please complete the
owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to
become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or used
for any application other than that for which it was designed. If you have any questions relative to a
particular application, DO NOT use the machine until you have first contacted the distributor to
determine if it can or should be performed on the product.
For technical questions please call
1-800-222-5381
.
INTENDED USE
This engine stand is used to mount an automotive type of engine when removed from a vehicle. This
device is designed to provide access to the engine for servicing and/or rebuilding. The stand
incorporates a locking, rotating mounting plate so that the user can turn the engine for ease of access.
The stand also incorporates wheels and casters to allow mobility across a smooth, flat surface.
DO NOT USE FOR ANY PURPOSE OTHER THAN THOSE USES OUTLINED ABOVE!
DO NOT EXCEED RATED CAPACITY OF ENGINE STAND!
TECHNICAL SPECIFICATIONS
Description
Item
47033
Maximum Capacity
1,000 lbs.
Safe Operating Temperature is between 40°F
– 105°F (4°C - 41°C)
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed
below may result in serious injury.
CAUTION:
Do not allow persons to operate or assemble this engine stand
until they
have read this manual and have developed a thorough understanding of how the engine stand
works.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur.
It must be
understood by the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
