8
7. Insert the head plate assembly (2) into the head plate collar of the main post (9). Then line up one
fixed position hole on the head plate assembly (2) with the main post stop hole (9), and assemble
them by inserting the stop pin (1).
8. Check that all hardware has been tightened before use.
9. Engine Stand is now ready for use.
BEFORE USE
WARNING:
Failure to heed these warnings may result in personal injury, property damage
and/or death.
Study, understand and follow all warnings and instructions before using this stand.
Do not exceed rated capacity. Use only on hard, level surfaces capable of sustaining the load.
Lock mounting plate-rotating mechanism before applying the load.
Be sure engine is centered and secured to mounting plate before applying load to stand. Off
center loads may make the load and handle rotate in either direction when the rotational locking
device is released.
Release the rotational locking device slowly and carefully.
Do not attempt to move the loaded stand across a floor having cracks or other obstacles that
could impede movement.
Never work directly under a supported load.
Visually inspect stand for damage before use. Check for cracked welds, bent metal and loose,
damaged or missing parts.
Use only attachment and adapters supplied and approved by the manufacturer. Do not make any
alterations to this product.
