Page
of 8
4
ASSEMBLY
1.
Slip the Strut on to the Axle Shaft in the position shown in (Figure 1). Secure the Struts and
Tag Axle to the Frame with six M8
×
20 Hex Bolts, 8mm Flat Washers and M8 Locking Nuts.
Figure 1. Tag Axle Installation
2. Slide the Wheels onto the Axles. Then secure each Wheel to the Axle with a 12mm Flat
Washer and a M12 Lock Nut (Figure 2).
Figure 2. Back Wheel Installation
3. Connect the Receiver and the Center Strut to the Steering Axle with a M8
×
20 Hex Bolt, a
8mm Flat Washer and a M8 Locking Nut (Figure 3)
.
Tag Axle Shaft
Tag Axle Support
Strut
