Strongway 46193, Руководство пользователя

Страница: 4 / 21

4
DO NOT OPERATE OR REPAIR THIS EQUIPMENT WITHOUT READING THIS
MANUAL.
To maintain the Transmission Jack and user safety, the owner is responsible for reading and following
these instructions.

Inspect the service jack for proper operation and function.

Keep instructions readily available for equipment operators. Make certain all equipment operators
are properly trained; understand how to safely and correctly operate the unit.

Allow unit operation only with all parts in place and operating properly.

Use only genuine replacement parts. Service and maintain the unit only with authorized or approved
replacement parts negligence will make the jack unsafe for use and void the warranty.

Carefully inspect the unit on a regular basis and perform all maintenance as required.

Store these instructions in the handle of your jack. Keep all decals on the unit clean and visible.

Safety: always follow safety precautions when installing and operating this jack.

Before proceeding ensure that you fully understand and comprehend the full contents of this manual.

Failure to operate this equipment as directed may cause injury or death.

The distributor is not responsible for any damages or injury caused by improper use or neglect
Always use Jack Stands!
DO NOT USE wood blocks or any other non-approved load sustaining devices. The manufacturer only
warrants loads to be sustained by jack stands that meet current ASME standards.
DO NOT USE wood blocks or any other non-approved lifting devices for a means of lifting with the jack
and or load being raised. Failure to head these warnings may cause injury or death.
SAFETY MARKINGS
WARNING:
1. Study, understand, and follow all instructions before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, level surfaces.
4. Adequately support the vehicle before starting repairs.
5. Use of this product is limited to the removal, installation, and transportation in the lowered position,
of transmissions, transfer cases, and transaxles.
6. No alterations shall be made to this product.
7. Only attachments and/or adapters supplied by the manufacturer shall be used.
8. Do not use this jack for any use other than the manufacturer specified usage.
9.
Failure to heed these markings may result in personal injury and/or property damage.