background image

21 

 

Limited Warranty   

Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or 
“Your”) that the Strongway product purchased will be free from material defects in both materials and 
workmanship, normal wear and tear excepted, for a period of one year from date of purchase.   The foregoing 
warranty is valid only if the installation and use of the product is strictly in accordance with product instructions. 
There are no other warranties, express or implied, including the warranty of merchantability or fitness for a 
particular purpose. If the product does not comply with this limited warranty, Your sole and exclusive remedy 
is that We will, at our sole option and within a commercially reasonable time, either replace the product 
without charge to You or refund the purchase price (less shipping). This limited warranty is not transferable. 

 

Limitations on the Warranty 

This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, 
or as a result of any accident or in any other manner; (c) damage from misapplication, overloading, or 
improper installation; (d) improper maintenance and repair; and (e) product alteration in any manner by 
anyone other than Us, with the sole exception of alterations made pursuant to product instructions and in a 
workmanlike manner. 

 

Obligations of Purchaser   

You must retain Your product purchase receipt to verify date of purchase and that You are the original 
purchaser. To make a warranty claim, contact Us at 1-800-222-5381, identify the product by make and model 
number, and follow the claim instructions that will be provided. The product and the purchase receipt must be 
provided to Us in order to process Your warranty claim. Any returned product that is replaced or refunded by 
Us becomes our property. You will be responsible for return shipping costs or costs related to Your return visit 
to a retail store. 

 

Remedy Limits 

Product replacement or a refund of the purchase price is Your sole remedy under this limited warranty or any 
other warranty related to the product. We shall not be liable for: service or labor charges or damage to Your 
trailer incurred in removing or replacing the product; any damages, including, without limitation, damages to 
tangible personal property or personal injury, related to Your improper use, installation, or maintenance of the 
product; or any indirect, incidental or consequential damages of any kind for any reason. 

 

Assumption of Risk 

You acknowledge and agree that any use of the product for any purpose other than the specified use(s) 
stated in the product instructions is at Your own risk. 

 

Governing Law 

This limited warranty gives You specific legal rights, and You also may have other rights, which vary from 
state to state. Some states do not allow limitations or exclusions on implied warranties or incidental or 
consequential damages, so the above limitations may not apply to You. This limited warranty is governed by 
the laws of the State of Minnesota, without regard to rules pertaining to conflicts of law. The state courts 
located in Dakota County, Minnesota shall have exclusive jurisdiction for any disputes relating to this 
warranty. 

 

 

 

Distributed by 

Northern Tool + Equipment Co., Inc. 

Burnsville, Minnesota 55306 

NorthernTool.com   

Made in China

 

Содержание 46193






















Отзывы: