12
TO ADD JACK OIL:
The hydraulic cylinder assembly contains hydraulic fluid that must be kept at approximately 80% full at
all times for proper operation. To check the level and to fill remove oil filler plug (30)
1. Position the jack on level ground and lower the saddle.
2. Remove the oil plug.
3. Fill the oil case until oil level to 80% full.
4. Replace oil plug.
5. Perform the Air Purge Procedure.
TO REPLACE JACK OIL:
1. Position the jack on level ground and lower the saddle.
2. Open release valve by turning handle counter-clockwise (4 full turns).
Содержание 46193
Страница 17: ...17 ASSEMBLY DIAGRAM ...