Strongman Tools Telford, Руководство по установке и инструкции по эксплуатации

Страница: 14 / 44

Version 1
14
Parts need crane or hoist to carry during off-loading the package for installing the lift
Description Weight (kg) Carrying Method
1 Runway platform (at stopper side) 85
By Crane or hoist
2 Runway platform (at ramp side) 105
3 Cover of base 48
4 Post and Carriage 325
5 Base 103
6 Mid platform 364
7 Steel plate for packaging 128
Parts with weight less than 20kg
8 ramps
Human handling
9 Power unit
10 chains
11 Standard parts
5.2 SITE SELECTION:
Before installing your car parking lift, check the following:

Lift Location: Always use architect’s plans when available.
 Check layout dimension against floor plan requirements making sure adequate space is
available. Your lift requires a 220v, 30amp, single phase, grounded electrical source. There
should be room enough to operate the lift in a safe manner and without restrictions.
 Space Required: Please refer to the drawing for detailed installation size.

Overhead Area: The area where the lift will be located should be free of overhead obstructions
such as heaters, building supports, electrical lines, doors, lights, etc.

Floor Area: Visually inspect the site where the lift is to be installed and check for cracked or
defective concrete.