24
11. Press the “Down” button
—
the spool with the anchor rope is unlocked, (for the SH 35PRO winch,
unlocking will occur after the anchor rope has been unwound from the reel by 1.20 cm). Pull the anchor
rope and rewind the required length; thread the rope through the anchor roller and tie the U
-
shaped arm
to attach the armature to the end of the rope.
13. Fix the anchor in the U
-
shaped arm, press the “Up” button and hold it; the winch lifts
the anchor,
which goes into the anchor roller. Then immediately release the “Up” button. If you don't release the
button in time, it is possible that the thermal relay will trip for a while, but after a while, thermal relay will
turn on again and the winch will be ready for operation.
Using a product without a thermal relay can lead to a fire and a threat to your life!
By no means
change
its position and disconnect it from the power cable!
