27
10.2 Preventive service
10.3 Repairs
10.3.1 Replacing the protective cover
CAUTION / PLEASE NOTE!
When operating the device with the protective covers removed, there is an
increased risk of injury caused by the exposed, moving elements.
1. Remove handle as described in 9.3.2
2. Unscrew the two attachment screws with a hex key.
3. Pull the rounded ear edges carefully outwards and then backwards out of the guide
grooves keeping them in place.
4. Push new protective covers into the guide grooves proceeding in reverse order.
Reinstall attachment screws.
Attachment screw
(hex socket head)
Keyway
Protective cover
10.2.1 Care
instructions
The outside of the device should be cleaned with a damp cloth from time to time (
not the
electrical contacts in the connection slot, and on the battery
). In addition, the metal
surfaces are to coated with a suitable medium to counteract corrosion (
not the electrical
contacts in the connection slot, on the battery
).
(In case of doubt, contact your authorized HURST dealer or HURST directly!)
10.2.2 Function and load test
If there is any doubt regarding the safety or reliability of a device, a function and stress test
must also be performed by an authorized HURST dealer or HURST directly.
Blade arm
