26
ATTENTION!
When cleaning units and equipment, note that no cleaning agent may be used
that has a pH value outside the range 5 - 8!
10.1 General information
10. Repairs
Service work may only be performed by the device manufacturer or by personnel trained by
the device manufacturer and authorized HURST dealers.
Only HURST spare parts may be used to replace all components (see spare parts list), as
special tools and compliance with, assembly instructions, safety aspects and inspections are
required (see also chapter “Maintenance and Servicing”).
During assembly, ensure that all components are particularly clean, as dirt can
damage the equipment!
ATTENTION!
Because HURST devices are designed for highest performance, only components
speci
¿
ed in the spare parts list for the appropriate equipment may be replaced.
Other components in the device may only be replaced if:
- You have participated in an appropriate HURST service training course.
- You have been explicitly granted permission by HURST Customer Service
(valid HURST certi
¿
cate required!)
NOTE:
Always register your tool on the HURST Jaws of Life internet site. This is the only
way to guarantee extended warranty cover.
WARNING / CAUTION / PLEASE NOTE!
To avoid injuries, take out the battery each time before you do any repairs.
This avoids an unwanted start up or movement in the cutting and spreading
area of the device.
As the devices may also be pressurized when not in operation, protective
clothes must be worn when repairs are being carried out.
