PART 2 • English
5
English
22. Heat - The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that products heat.
Safety Warnings
1. The normal operating temperature of the digital receiver is between 0° C and 40° C
2. Please prevent the receiver from operating in dusty conditions.
3. The receiver shall be operated in ventilated environment away from heat sources. No
objects filled with liquids, such as vases, shall be placed on the unit. The receiver shall not
be exposed to dripping or splashing. Should this happen, disconnect your receiver from the
main and consult your dealer.
4. Do not open or disassemble the outer chassis in order to avoid the danger of electric shock
and damaging to the receiver. Opening the chassis will also void the warranty.
5. The antenna connected to the receiver shall be equipped with anti-shock device from
lightning. Where the mains plug or an appliance coupler is used as the disconnected device,
the disconnected device shall remain readily operable.
6. If the receiver is inoperative, please consult the Customer Support.
This receiver has been manufactured to satisfy international safety standards. Please read the following
recommended safety precautions carefully.
MAINS SUPPLY:
AC 90 ~ 240 V ~ 50/60 Hz
OVERLOADING: Do not overload wall outlets, extension cords or adapters as this can result in fire or
electrical shock.
LIQUIDS:
Keep liquids away from the receiver.
CLEANING:
Before cleaning, disconnect the receiver from the wall socket. Use a cloth lightly
dampened with water (no solvents) to clean the exterior.
VENTILATION: Do not block the receiver ventilation holes. Ensure that free airflow is maintained
around the receiver. Never store the receiver where it is exposed to direct sunlight or
near heating equipment e.g. a radiator. Never stack other electronic equipment on top
of the receiver. Place the receiver at least 30 mm from the wall.
ATTACHMENTS: Do not use any attachment that is not recommended by the manufacturer; it may cause
a hazard or damage the equipment.
CONNECTION: Connect all components before plugging any power cords into the wall outlet. Always turn off
the receiver, TV and other components before you connect or disconnect any cables.
SERVICING:
Do not attempt to service this product yourself. Any attempt to do so will make the
warranty invalid. Refer all servicing to a qualified service agent.
LIGHTNING:
If the receiver is installed in an area subject to intense lightning activity, protection
devices for the receiver mains connector and modem telephone line are essential. The
individual manufacturer’s instruction for safeguarding other equipment, such as TV set,
Hi-Fi, etc., connected to the receiver must also be followed during lightning storms.
GROUNDING: cables must be grounded. The grounding system must comply with SABS 061.
NOTE:
Dispose the used batteries at designated place for environment protection
