PART 2 • English
9
English
4.0 GETTING STARTED
4.1 Switching On
n
Turn on your TV set.
n
Turn on the main power supply to the receiver and press
Power On/Standby
.
n
If TV set does not turn automatically to the SCART input, please select this input with the
AV
key,
or similar on your TV remote control.
4.2 First Time Installation
Set up wizard:
n
When the receiver is turned on for the first time you will see the menu
“Set up wizard”
n
Choose
”TV Format”
by using
tu
buttons. (Use 4:3 if you do not have a wide screen TV,
otherwise use 16:9)
n
Press
”OK”
for quick installation or
”Menu”
for advanced installation.
n
By using
”Quick Installation”
the channel search will start.
n
By using
”Advanced Installation”, ”Language select”, ”TV/VCR settings”, ”Time settings”
and
”Antenna settings”
be defined manually.
n
Choose
”Language select”
by using the
pqtu
buttons.
Here you can set up; Menu language, 1st Audio lang and 2nd audio lang and 1st text lang and
2nd text lang
n
Choose
”TV/VCR settings”
by using the
pqtu
buttons.
Here you can set up; HDMI output, TV Screen Format, Picture Format and HDCP Always Enabled
n
Choose
”Time settings”
by using the
pqtu
buttons.
Here you can set up; Country, Time zone selection, preferred Time zone and if daylight savings
time should be activated.
n
Choose
”Antenna settings”
by using the
pqtu
buttons.
Here you can set up antenna supply
n
When you have made the changes you want, press
BLUE
”Save&Next” to go to the next step.
4.3 Channel Search
In this menu you can select a channel with signal to adjust your antenna for max signal en reception
n
Select
“MUX”
to choose a channel to test signal strength. Enter the channel number with the
numeric
keys on the remote control. Press the
q
button for next step.
n
Select
“Frequency”
to manually enter a frequency to test signal strength. Enter the frequency
using the numeric keys on the remote control. Press the
q
button for next step.
NOTE:
the bandwidth changes automatically
n
Press
OK
to start scanning process.
The channel search progress will be shown on screen.
When the search is done and all channels have been found, a list of favorite networks will be shown and
you have to select your favorite network.
After this the receiver will automatically switch to the first channel in the list.
