Aspect Mode
:
Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are:
Auto
(automatic detection of aspect
ratio),
4:3 PS
(Displays 16:9 widescreen broadcasts full screen on your 4:3 TV),
4:3 LB
(black bars on top and under the picture on a 4:3 TV) and
16:9
(use this
setting for 16:9 TV sets).
Connection
:
Use this option to select the connection to your TV set. Select
HDMI
or
TV
SCART
. If connection type HDMI is selected, then only the CVBS signal is
available on the TV SCART.
Digital Audio Output
: Toggles between
PCM
and
BIT Stream
output. When
PCM
is selected, all
digital audio will be converted to (analogue) stereo audio.
BIT Stream
enables
you to listen or transfer Dolby® Digital/ Dolby® Digital Plus* audio to the TV
via HDMI or to a Home entertainment system (for example) through coaxial
S/PDIF.
*Dolby and the double-D symbol are registered trademarks of Dolby Laboratories
7.3.3 Local Time Setting
Here you can set up your region and time zone.
Region
:
Use
tu
to select the region you live in.
GMT Usage
:
Set to
By Region
for broadcaster defined time,
User Define
to select manual a
GMT zone or to
Off
to input time and date manually.
GMT Offset
:
Allows you to adjust your time zone. This option is only available when
GMT Usage
is set to
User Define
.The
GMT Offset
range is "-11:30 ~ +12:00",
increasing by half hours progressively. The cities matching the set
GMT Offset
are displayed at the bottom of the screen.
Daylight Saving
:
Select
Off
or
On
to add one hour for summer time.
Date
:
Date
and
Time
settings are available only when
GMT Usage
is set to
Off
. Use
the
0~9
buttons to enter the date. Press
EXIT
to proceed.
Time
:
Date
and
Time
settings are available only when
GMT Usage
is set to
Off
. Use
the
0~9
buttons to enter the time. Press
EXIT
to proceed.
Time Display
Select
On
to display time on screen,
Off
to remove.
7.3.4 Timer Setting
This menu allows you to set up to 8 timed events for recording or waking up the receiver.
Use
pq
to select
Timer Setting
from the
System Setup
menu and press
ok
to enter.
The receiver will display a list with 8 timers, followed by their respective status. Select the timer you
wish to set or change with
pq
and press
ok
to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode
:
Choose between
Off
the timer is inactive,
Once
,
Daily
(the timer will be
executed every day, same time) or
Weekly
(the timer will be executed every
week, same day, same time) and
Monthly
(the timer will be executed every
month, same day, same time).
Timer Service
:
Choose between
Channel
(the timer will wake up the receiver) or
Record
(Timer will start recording the scheduled event).
Wakeup Channel
:
Use
tu
to select the channel the timer will wake up with.
16
