Strong SRT 6511, Руководство пользователя

Страница: 14 / 15

11
PART 1 • English
English
6.4 Channel list and view mode
In viewing mode press oK button and the channel list will be shown. Press the
pq
buttons to select the channel and press
the oK button to view selected channel. To switch between TV and Radio channels press the TV/Radio button.
You can sort channels by FTA -> CAS by pressing the RED button, or A-Z by pressing the YElloW button.
You can select satellite by pressing the gREEn button.
6.5 fAV list
In viewing mode, you can get the Favorite channel list by pressing the fAV button. Press the RED button to change FAV group.
If you did not set favorite channels before, it will show All channels list.
6.6 Teletext function
In channel view mode press the TEXT button. The OSD Teletext will be shown in case Teletext is available on the current
program. With the
pq buttons you can scroll displayed page number. You can insert page number directly with the numeric
buttons.
6.7 subtitle function
In channel view mode press the f2 button. The list of selectable subtitle languages will appear if DVB subtitle available. With
the
pq
buttons select the subtitle language and press the oK button. In case DVB subtitle aren’t available you can search at
Teletext if therefor subtitles are available.
noTE: The availability of DVB subtitle depends on the broadcaster.
6.8 sleep Timer function
Press the f1 button to activate the sleep timer. Use the
tu
buttons to switch between following modes: OFF, 15 Min, 30
Min, 45 Min, 60 Min, 90 Min,120 Min and -- Min -> where you can enter your preferred time.
6.9 Zoom function
Press gREEn (Zoom) button to get pointer, then use the pq and tu buttons to select position you want to zoom in and
press oK to activate the function.
A.1 TRoUblEshooTIng
There may be various reasons for the abnormal operation of the receiver. Check the receiver according to the procedures
shown below. If the receiver does not work properly after checking it, please contact the dealer. Do NOT open the receiver
cover. It may cause a dangerous situation and the warranty will get void.
Problem Possible causes What to do
The display on front panel does
not light up. The power cord is not plugged in. Check that the power cord is plugged in to
the wall outlet.
No picture or sound Wrong connection of the Audio/
Video output of the receiver to TV.
Audio muting.
TV power off. Connect the Audio/Video output of the
receiver to TV correctly.
Press the Mute button
Turn TV on.
No picture The receiver can’t receive the signal
Incorrect values of some tuner
parameters.
Wrong direction of the dish
Check the antenna cable, replace the cable,
or connect the cable to the receiver tightly.
Set the values of tuner parameters correctly
in installation menu.
Check the signal strength with a
professional satellite finder and adjust your
dish correctly or call a professional installer.
The remote control
does not work The batteries of the remote control
are not inserted or exhausted Check whether the batteries are inserted
correctly or if they are exhausted and replace
them.