PART 1 • English
11
English
“TP – NIT” – receiver will search channels from one transponder and in addition use network information. This mode
recommended if you want to search channels of particular broadcaster only.
Sub options are:
“
Free
” –
receiver will search only Free To Air channels
“
Free+Scr
” – receiver will search for all channels
Transponder
:
select index from the stored list
Frequency
:
value of transponder frequency in MHz
Symbol Rate
:
value of symbol rate in kSymbols Per Second
Polarity
:
Horizontal / Vertical / Right / Left
FEC
:
Auto, 1/2, 2/3, 3/4, 5/6, 7/8
Function
:
Append/Delete/Change
AGC Signal
:
Indicates received signal strength level
8.2.3.1 How to search for channels:
Highlight “
Tune method
” field and press
OK
. Receiver will start channel scan. Names of the found channels will be shown in the two
columns: for TV and Radio separately.
You can interrupt search process by pressing to
OK
or Exit button.
If you press
OK
button: search process will be interrupted and you can select one of the following options:
n
Save
– to save all found channels
n
Unselect
– to unselect some unwanted channels from the list. Use
OK
button to unselect channels
and
VOL
t
/
u
buttons to switch between TV and Radio list. Once you finish – press
EXIT
button,
select “
Save
” and press
OK
. Only selected channels will be stored in the memory
n
Cancel
– to cancel result of search. No channels will be stored in the memory
If you press
EXIT
button: search process will be interrupted and no channels stored in the memory.
8.2.3.2 How to add new transponder:
n
set “
Tune method
” to “
TP
” or “
TP+NIT
”
n
move focus to “
Frequency
” and enter value in MHz
n
move focus to “
Symbol rate
” and enter value in kSPS
n
move focus to “
Polarity
” and select value
n
move focus to “
FEC
” and select value or set “Auto”
n
move focus to “
Function
” select “
Append
” and press
OK
. Message “
Saving data...
” will
be shown on screen. New transponder will be added to the end of the list
8.2.3.3 How to delete present transponder:
n
set “
Tune method
” to “
TP
” or “
TP+NIT
”
n
move focus to “
Transponder
” and choose transponder you want to delete
n
move focus to “
Function
” select “
Delete
” and press
OK
. Message “
Saving data...
”
will be shown on screen. Selected transponder deleted from the list
8.2.3.4 How to correct/edit parameters of the transponder:
n
set “
Tune method
” to “
TP
” or “
TP+NIT
”
n
move focus to “
Transponder
” and choose transponder you want to modify
n
move focus to “
Frequency
” and enter value in MHz
n
move focus to “
Symbol rate
” and enter value in kSPS
n
move focus to “
Polarity
” and select value
n
move focus to “
FEC
” and select value or set “Auto”
n
move focus to “
Function
” select “
Change
” and press
OK
. Message “
Saving data...
”
will be shown on screen. Modified data are stored in the memory.
n
Press
EXIT
to go back to the previous mode.