PART 1 • English
12
8.2.4 Setup Lock/PIN
Press
OK
on ‘
Setup Lock/PIN
’ in the
Setup Menu
. Set the
Menu Lock
,
Change the PIN
, enter the
New PIN
and confirm the
Confirm PIN
.
n
Use
CH
p
/
q
to move up and down the list.
n
Use
VOL
t
/
u
to change the setting.
Menu Lock
:
On/Off
Change PIN
: Press
OK
if you want to change.
New PIN
:
Enter your new 4-digit code
Confirm PIN
: Confirm your new 4-digit code
Note:
The default PIN is ‘
1234
’
Press
EXIT
to go back to the previous mode.
8.2.5 Time Setting
Press
OK
on ‘
Time Setting
’ in the
Setup Menu
. Set the
Local Time
,
Sleep Time
,
Timer Status
and
Program the Timer
.
n
Use
CH
p
/
q
to move up and down the list.
n
Use
VOL
t
/
u
to change the setting.
Local Time
:
if you want to correct time and date then enter in format dd/mm/yyyy - day – hh:mm
Sleep Time
:
0 ~ 180 min
. Receiver will be turned off after selected time interval.
Timer
:
select timer number
Status
:
Disabled/Enabled
. If Enabled – receiver will be turned on within selected channels at defined “
start time
” and
turned off after “
duration
” interval
Channel type
:
TV/Radio
.
Channel number
:
enter channel number. If you use multi satellite installation – make sure to enter channel number in “
All satellites
” mode.
Channel name
:
displayed automatically and depends from channel number.
Start time
:
enter start time in format dd/mm/yyyy - day – hh:mm
Duration
:
enter duration in hh:mm format.
Note:
Timer also can be programmed from EPG. See “Program Guide” chapter of this manual.
n
Press
OK
to store settings and go back to the previous mode.
8.2.6 Factory Default
Press
OK
on ‘
Factory Set’
in the
Setup Menu
. Confirm whether you wish to go back to the factory default settings.
This function wi�
the memory.
8.3 Main Menu Settings
From the
Main Menu
you can access to the
Program Guide
,
Channel Sorting
,,
Language Preference Settings
,
Favorites Editing
,
Channel
Editing
,
Smart card information
and
Software Version information
.
n
Press
MENU
n
Use
CH
p
/
q
to move up and down the list
n
Use
VOL
t
/
u
to change the setting
n
Upon reaching the required menu line, press
OK
to enter the setting
n
Press
EXIT
to go back to the previous mode
8.3.1 Program Guide
This menu displays same information as described in chapter 8.4.4. Press
OK
on ‘Program Guide’ in the Main Menu.