17
16
6.1 Getting Started
6.1 Getting Started
Ȟ
OTA Menu <Figure 6-9>
You can download the latest software via satellite using the OTA (Over the Air) menu.
ҫ
ҫ
Note : OTA information is subject to change by the manufacturer with or without
notice.
͈
Press
or
to select a Scan mode:
- Default :
Default satellite and transponder information is used for OTA download.
- User :
Use this mode if OTA download fails in default mode and/or you wish to add or
edit satellite and transponder information. Please contact your local dealer or
provider for more information.
͉
Press the
RED
button to start OTA download.
ҫ
ҫ
Note : Be careful! Please do not power off during OTA download.
Once OTA download is complete, your satellite receiver will be reboot
automatically.
VOL
VOL
<Figure 6-9>
You can use
/
to navigate between channels until you find the channel you want.
Ȟ
If you know the channel number, you can enter it with the
NUMERIC
buttons and wait 2
seconds until the channel is changed.
Ȟ
If you know the channel name or transponder or CAS, you can press
to display the
channel list <Figure 6-10>
CH
CH
4) Channel Selection
<Figure 6-10>
͈
In the right side of screen, detailed information about the selected channel will be
displayed. (Satellite Name, Frequency(Polar) and Channel Name)
͉
You can use the following buttons to navigate between channels:
-
/
:
Moves one channel up/ down.
-
/
:
Moves one page up / one page down.
- RED :
Shows all channels in the current group.
- GREEN :
Shows all channels sorted alphabetically.
- YELLOW :
Shows all channels sorted by Transponder.
- BLUE :
Shows all channels sorted by CAS system.
͊
Press
when the selection bar is positioned on the desired channel.
VOL
VOL
CH
CH
<Figure 6-8>
