Strong SRT 4651X, Руководство пользователя

Страница: 8 / 21

15 14
Ȟ
Manual Scan <Figure 6-7>
͈
Select a transponder.
͉
To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC
buttons.
͊ To change a transponder's polarization, use the or keys.
͋
To add a new transponder, press the GREEN button.
͌
To delete a transponder, press the YELLOW button with the cursor next to the Frequency
parameter.
͍
To search a transponder, set its different parameters and press .
VOL VOL
6.1 Getting Started 6.1 Getting Started
Ȟ
Package Identifier (PID) Scan <Figure 6-8>
͈
Select a transponder.
͉ To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC
buttons.
͊ To change a transponder's polarization, use the or keys.
͋
To add a new transponder, press the GREEN button.
͌
To delete a transponder, press the YELLOW button with the cursor next to the Frequency
parameter.
͍
To search a transponder, set its different parameters and press / . You can search
a specific channel of the transponder by setting its PID data (Video, Audio and PCR).
ҫ ҫ
Note : If you cannot access programs after correctly completing a scan procedure,
please contact your seller or your installer.
CH
CH
VOL VOL
<Figure 6-4> <Figure 6-5>
Chose Auto Scan to search using transponders (frequencies) in memory, or chose Blind Scan to
look for new satellite/transponders.
Through this function, the receiver searches for all the available channels and saves them in
memory.
Ȟ
Auto Scan <Figure 6-4>
͈ Press on the names of the satellites that you want to scan under ‘Satellite List’.
You can select more than one satellite.
͉ Press and set the ‘Search Type’ and ‘Network Search’ parameters.
- Search Type : Decide for which channels to search (All channels/ Free channels only/
TV channels only).
- Network Search : Set ON to find more transponders (frequencies) through a Network
Information Table (NIT) scan. That is, when the broadcaster is
sending a NIT through a given transponder, the receiver will also scan
for transponders listed in the NIT and not otherwise recognized.
(this can happen when a transponder is new)
͊
Press under ‘SCAN’ to scan the selected satellites. <Figure 6-5>
VOL
3) Satellite Scan
Ȟ Ȟ
Blind Scan <Figure 6-6>
͈
Select the satellites you want to search by pressing the button on the remote.
͉ Press / to set the “Polarization” and “Scan Mode” options.
- Polarization : Select Vertical / Horizontal / All.
- Scan Mode : Select Fast / Detail.
- SCAN : Begin channel search of the selected satellites.
͊
Press the RED button on the remote to begin a blind scan of all ‘selected’ satellites.
CH
CH
VOL
<Figure 6-6> <Figure 6-7>