13
12
6.1 Getting Started
6.1 Getting Started
͋
Select the item that you want to edit, and set its parameters as desired. <Dish Setting>
- LNB Power :
Select among ON/OFF/13V/18V.
- LNB Type :
Select among Single/Universal/OCS.
- LNB Freq :
Set the frequency of the LNB oscillator.
- 22KHz :
When not AUTO, set the signal path from LNB or switch by selecting a control
signal among 0/22KHz.
- DiSEqC switch :
Select DiSEqC protocol among OFF/1.0/1.1 as appropriate for your
configuration.
- Committed/Uncommitted :
Select the DiSEqC port.
͌
Select the item that you want to edit and set its parameters as desired. <Motorized Setting>
- Frequency :
If the default TP frequency is not appropriate, you can select another TP
frequency at which to check for signal.
- DiSEqC Motor :
Select DiSEqC protocol among OFF/1.2/USALS as appropriate for your
Motor.
(When the DiSEqC Motor parameter is set as 1.2)
- Hemisphere
: Select between the Northern/Southern.
- Move :
You can move the dish to the West/East.
- Limit :
If you want to set limits, press
.
- Disable Limit :
You can disable the East and West limits.
- Goto Center :
Move the dish to the initial 0 position.
- Set East / West Limit :
Move the dish East or West using / .
Press
to set East or West limit.
(When the DiSEqC Motor parameter is set as USALS)
- Sat Degree :
Satellite location.
- Antenna Position :
Press .
- Goto Reference :
Move the dish to the reference 0 position.
- Antenna Longitude :
Your longitude at present.
- Antenna Latitude :
Your latitude at present.
ҫ
ҫ
Note : You need to know what LNB you are using to correctly set the L.O. (local
oscillator) frequency.
ҫ
ҫ
Note : You need to understand how your receiver is connected to properly set the
22KHz and DiSEqC.
͍
When you are done, press the
EXIT
button.
VOL
VOL
<Figure 6-2>
<Figure 6-3>
͈
Press the
MENU
button to display the main menu.
͉
Use
/
and /
to move in the menu.
͊
Press
on ‘Dish Setting’. The following window will appear. <Figure 6-2>
If you have a motorized dish, press
on ‘Motorized Setting’. <Figure 6-3>
ҫ
ҫ
Note : Enter a 4-Digit password if need arise. The default password is ‘0000’.
VOL
VOL
CH
CH
2) Antenna Setup
