The installation will proceed to the
Internet Connection
screen, choose between
Setup
or
Skip
and
confirm with
OK
. If you choose
Setup
you will be forwarded to the network configuration screen; with
Skip
you automatically jump one screen further and you are able to choose the correct time zone.
On the following screen, you can select the
Antenna scan type
, choose the one you like to use and
follow the on-screen instructions. Select which input source you want to use:
DTV
to receive digital
terrestrial broadcasts or
ATV
for analogue terrestrial reception. Other tuners can be set-up if you choose
for to
Skip
. Select
Cable
to receive digital or analogue cable broadcasts or
Satellite
to receive digital
satellite broadcasts (if you have a satellite dish).
3.1 DVB-S2 installation
Satellite Setting
Press the
MENU
button and select
Channel Scan
by pressing
OK
.
Use the
pq
buttons to go to
Tuner Type
menu and by pressing
pq
again in the menu you can select
Satellite
, confirm with
OK
and press
BACK
to return to the previous menu.
Channel Search
Use the
pq
buttons to choose
Auto Tuning
and press
OK
to confirm. The default setting is ASTRA 19.2.
Use
t
u
if you like to select a different satellite signal and press
OK
to confirm.
With the
pq
buttons you can decide which scan options shall be used:
Channel Type
Choose between
Free & Scramble
and
Free
.
Service Type
Select
DTV
to search DTV channels only, or
All
for a complete search.
Network Search
Network Scan on the selected satellite.
Clear DB
Choose between
All
or OFF if you want to delete channels that were
previously saved during the installation of new channels.
It is recommended to use the default settings. Then select
Auto Scan
and press
OK
to proceed. Scanning
a full satellite may take a while to complete.
You have the same possibilities with the
DTV - Manual Tuning
process.
NOTE:
Network Scan: This function allows you to search for the NIT data of the
corresponding satellite to receive newly appeared channels. Please consider
that unlike Astra 19.2 or HOT BIRD 13° some satellites do not offer this
function or only support it partly. If you have any questions, please contact
your dealer or the service/service hotline.
3.2 DVB-T2 installation
Terrestrial Setting
Press
MENU
and select
Channel Scan
by pressing
OK
. First use the
pq
buttons to enter the
Country
menu and select the country you are living in, confirm with
OK
and return to the previous menu with the
BACK
button.
Use the
pq
buttons again to go to the
Tuner Type
menu and by pressing
pq
you can select
Antenna
,
confirm with
OK
. The TV will now search for digital channels.
After choosing the
Antenna
option, go to
Auto Tuning
and choose between
DTV, ATV
or
both
scan
options. Select one and confirm by pressing the
OK
button; with
BACK
you return to the previous menu.
8
