Strong SRT 4120 Скачать руководство пользователя страница 25

Страница: 25 / 35

&OHMJTI

6.8. DISEQC 1.2 SETUP MENU

DiSEqC 1.2 Setup Menu is located under Antenna

Installation Menu. User selects the name of the satellite

and its properties like polarisation and frequency band at

the Antenna Installation Menu before entering DiSEqC 1.2

Setup Menu.
Setting Polarisation and 22 kHz parameters from

Antenna Installation Menu is optional. By default,

polarisation is set to H/V (both horizontal and vertical

frequencies) and 22 kHz is set to Auto (both 22 kHz Off

and 22 kHz On). These parameters can be left in their

default positions to simplify the installation task. The aim

is to drive the motor on the polar axis and watch the signal

quality indicator. When the receiver is tuned to a satellite,

the signal quality bar will rise. If the user is satisfied with

the signal quality he stores the current position of the

antenna. Otherwise he will try to fine-tune it until the desired

level is reached.

There are a certain number of satellites, which have

predefined presets stored in the box. Satellites having

predefined presets appear with their original names like

Astra, Hotbird, etc. If a satellite has predefined presets, the

user does not have to enter a reference transponder from

that specific satellite although It is possible to enter a

reference transponder for all satellites. Figure shows the

upper part of the DiSEqC 1.2 Setup Menu
Satellites that do not have predefined presets appear with

names like User 1, User 2, etc. Here, frequency, symbol

rate and polarisation of a reference transponder should be

entered in order to be tuned into the satellite.

The two essential parameters, frequency and polarisation

of a reference transponder should be entered according to

the antenna settings (See Figure 6.8.3). If the polarisation

setting is vertical in Antenna Installation Menu, it will be

vertical in DiSEqC 1.2 Setup Menu automatically and the

user will not be able to change it. Same situation is valid

when the polarisation is horizontal.

Polarisation should be set to H/V from Antenna

Installation Menu in order to be able to changed by the user

from DiSEqC 1.2 Setup Menu. Frequency values should

also be entered according to the 22KHz mode. In 22 kHz

Off mode (Low Band), the frequency range is between

10700 and 11900. It is between 11550 and 12750 for 22

kHz On (High Band). If 22 kHz mode is set to Auto, the

user can enter a value in the whole range that is between

10700 and 12750. Any frequency value out of the specified

range will cause a warning message to appear on the

screen.
The following part gives a detailed explanation about the

DiSEqC 1.2 motor functions.

All manuals and user guides at all-guides.com

Содержание SRT 4120




































Результаты поиска

Содержание SRT 4120

Отзывы:

Похожие инструкции для SRT 4120

Бренды по названию

Популярные бренды

Strong SRT 4120, Руководство пользователя

Результаты поиска

Содержание SRT 4120

Отзывы:

Похожие инструкции для SRT 4120

Бренды по названию

Популярные бренды