5-12
11236 Satellite Blvd. Orlando, FL 32837 Tel.: (407) 859-9317 Fax: (407) 850-6978 www.strongparachutes.com
Strong Enterprises Owner’s Manual. Dual Hawk Tandem System -
Revision L: 1/16
A
PPENDIX
C:
DHT Inspection Check List
Use this check-list to ensure all steps of the Inspection are completed.
Harness/Container SN__________ Date of Manufacture__________ In Service Date__________________
Refer to
Maintenance
Inspection:
Date of Inspection (Month/Year)
Harnesses (Instructor and Student)
Page
Section
No rust on hardware
3-5
3.3.3.1
Proper hardware installed.
3-5
3.3.3.1
Springs on snaps still functional.
3-5
3.3.3.1
4-point stitching on instructor side O-Ring attachments secure with no broken
stitches.
3-5
3.3.3.1
Hardware functional and tacked (leg strap Quick Ejectors).
3-5
3.3.3.1
No cuts on webbing.
3-5
3.3.3.1
Stitching is not unraveling on webbing.
3-5
3.3.3.1
No excessive fading of webbing.
3-5
3.3.3.1
Container
Page
Section
No rough edges, dents, or bends in grommets.
3-5
3.3.3.1
Grommets secure and in place.
3-5
3.3.3.1
Grommet fingernail test complete.
3-5
3.3.3.1
Drogue riser “L” link screws tight.
3-5
3.3.3.1
Closing pin housing on drogue riser securely tacked.
3-5
3.3.3.1
No cuts or frays in drogue riser webbing.
3-5
3.3.3.1
Closing flap and tuck tab stiffeners in good condition.
3-5
3.3.3.1
No holes or tears in Cordura or binding.
3-5
3.3.3.1
No broken stitches in Cordura or binding.
3-5
3.3.3.1
Drogue pouch secure.
3-5
3.3.3.1
No holes in drogue pouch.
3-5
3.3.3.1
Opening securely holds Drogue.
3-5
3.3.3.1
All Velcro© locations are clean.
3-5
3.3.3.1
Velcro© is secure and in place.
3-5
3.3.3.1
Ripcords, Drogue Release Cables and Housings
Page
Section
No excessive wear of ripcord hardware.
3-5
3.3.3.2
No kinks, frays, or broken strands in ripcord cables.
3-5
3.3.3.2
Cable tip is not exposed.
3-5
3.3.3.2
Reserve Pin straight.
3-5
3.3.3.2
Swedge’s are secure and approved parts.
3-5
3.3.3.2
Red H.G. line on 3-ring release not frayed or cut.
3-5
3.3.3.2
Rings on 3-ring release secure.
3-5
3.3.3.2
No dents, cracks, or rough edges on rings.
3-5
3.3.3.2
No prominent curves in 3-ring release cable.
3-5
3.3.3.2
Housings complete, no broken or missing housing caps.
3-6
3.3.3.2
Cable housings free of all dirt, gravel, sand, debris and are lubricated.
3-6
3.3.3.2
