STRIVR Pico G2, Руководство пользователя, Страница: 14 / 28

User Manual Facilitating training
support.strivr.com
10
Logging out
• Learners should select Log Off inside the headset before ending their training session and taking off the
headset. A complete training session includes three steps: Successful login, successful completion of
training, and successful logout.
• Auto Log Out: The headset will automatically log out of the current session and start a new one when it is
plugged into the charge cable.
Returning the headset
When a learner finishes training,
• Clean the headset and controller as specified in “Equipment hygiene” on page 5.
• Plug the headset back into the charge cable.
• For Oculus Go headsets connected to a USB hub and MD, perform a visual check to ensure the headset is
powered on and connected (this is not necessary for systems that do not include an MD):
°
After plugging the headset into the hub, the headset should display a green or yellow charging light (or
red if the headset is under 20% battery.)
°
Follow the charging cable back to the USB hub and verify the hub port displays a blue light.
° There should be a one-to-one ratio of
connected headsets and blue lights on
the hub.
°
If a connected port does not display
a blue light, the headset is not fully
connected and is probably turned
off (this generally occurs when
headsets aren’t immediately plugged
in after training and enter a deep
sleep mode.) If a headset is not fully
connected, it can’t transmit data or
receive new content, and learners will
not get credit for completed training.
Disconnect the headset, hold the
headset power button down for 5
seconds or until the blue indicator
light illuminates, and then reconnect
it. When a headset is powered on,
holding the headset up to your eyes
causes the screen inside to illuminate.