Strider MX 3, Руководство по эксплуатации

Страница: 75 / 102

75
Issued: 24.02.2005
S T R I D E R M X
Adjusting the clamping bolt:
(1.) Loosen the locking screw (2)
(Philips head No. 2.)
➨
The clamping tightness is adjusted by turning the clamping bolts.
The clamping tightness should be set so that the clamping lever can
be closed by hand without requiring too much force.
Adjusting the clamping tightness:
Unlock the clamping lever (1).
➨
Unlocking the clamping
lever
Adjusting the clamping
bolt
(2.) Turn the clamping bolt in the
appropriate direction:
(a) turn to right = increase clamping
tightness
(b) turn to left = decrease clamping
tightness
(3.) Align the clamping lever (1).
In order that the clamping bolt
fits precisely into the receptacle
when coupling the drive unit (see
chapter 14.4.1), the clamping
lever (1) must be leaning slightly
to the left when it is unlocked
(oriented to around 7 o’clock)
18.3 Mechanics
18.3.1 Adjusting the drive lock clamping bolts
Tools required:
1 x screwdriver; Phillips head No. 2
Repairs - mechanics