Strider MX 3, Руководство по эксплуатации

Страница: 54 / 102

54
Issued: 24.02.2005
S T R I D E R M X
No persons are permitted to sit on the scooter during
loading!
No persons are permitted to sit on the scooter during
transport!
Drive or push the Strider up a ramp into the vehicle.
Switch the engaging lever to drive mode.
Secure the Strider against tipping over by fastening it to the
transport vehicle with transport straps.
➨
➨
➨
Depending on the size of the transport vehicle, the Strider can be
dismantled in a few steps so that it can also be easily transported in
smaller vehicles.
When transporting, take particular care to ensure that the batteries are
securely fastened and make sure components cannot tip over.
No liability can be accepted for damage caused by transportation.
Transporting the Strider
14.2 Transporting the complete strider
(3 wheel version)
14.0 Transporting the strider
14.1 Transport information
Risk of accidents!
Accident hazard is increased when loading the Strider
partly due to high weight.
• Only use loading ramps equipped to take the weight.
• You should seek help from a second person.
Clamping and crushing hazard!
Increased hazards due to clamping or crushing result due to the
high component weight (such as batteries) during preparation for
transport.
• Always carry out any work to be done with great care.
• Always try to get help from a second person, especially when
stowing parts for transport.
14.3 Preparation for transport - separating component
(4 wheel version)