Need Help?
Visit our website at
www.razor.com
or call toll-free at
866-467-2967
Monday - Friday 8:00am - 5:00pm Pacific Time.
1
WARNING
Step 1
Step 2
Required Tools: (Not included)
A. Phillips screwdriver
B. 2 mm Allen wrench
C. Flat screwdriver
CAUTION:
To avoid potential shock or other injury, turn power switch OFF and disconnect
charger before conducting any assembly or maintenance procedures. Failure to follow these
steps in the correct order may cause irreparable damage.
Using a Phillips screwdriver, remove five (5) screws from
the battery cover on the charger port side.
Remove two (2) more screws from the other side of the
battery cover. Remove battery cover and set aside.
UB1 THROTTLE - REPLACEMENT PROCEDURE
PART # W15127016043
