Stricker Lipo Smart Para, Руководство пользователя, Страница: 2 / 16

2
The device complies with the current standards and directives of the EU. We certify this in the EC declaration
of conformity. If required we will be glad to send you the according declaration of conformity.
Index of Contents
Safety Instructions
Please read these safety instructions carefully before the first use:
- Before starting, check if the battery is well connected, especially if you have disconnect for
charging
- Before starting, check the function of the brakes
- turn the key switch to “ON”
Attention:
-
When you stop „off“ the key switch at the controller case
-
If you interrupt riding for a longer time „off“ the switch at the battery (otherwise the
battery will be discharged by itself)
- At disconnecting the bike or move the bike forward and rank, always turn off the motor. If
the bike is unguarded remove the key or
- Put the driving gas to 0 to avoid unintentional driving by moving the crank handle.
If you are not using the battery for a longer time (winter season) store the battery
completely charged and charge again every 4 month to avoid damage of the battery
(deep discharge).
- use only our charger
-
don’t choose the fastest speed in narrow or busy places
-
keep the device out of reach of children especially don’t allow somebody to enter anything into
the battery, risk of explosion or fire
- for loading the electro drive lipo into the car, remove the battery-
- driving uphill: For protecting the system, watch the battery temperature at the display (see page
12) while driving up the hill. The temperature shouldn’t go over 45 degrees Celsius.
1. Speed control and pedelec sensor................................................................................................... 03
1.1 Paraversion..................................................................................................................................... 03
1.2 Tetraversion.................................................................................................................................... 04
2. Operation of the ElectroDrive Lipo Smart...................................................................................... 04
3. Start – Journey – End……………………...................................................................................... 04
3.1 Light switch……………………………....................................................................................... 05
3.2 3-speedswitch…………………………........................................................................................ 05
3.3 LED temperature display of engine temperature........................................................................... 05
4.1 Batteries………………………………………………………………………………………….
4.2 Remove the battery........................................................................................................................
06
08
4.3 Fuse................................................................................................................................................ 09
4.4 Charger and charging of the battery.............................................................................................. 09
4.5 Optional equipment: 2 lipo batteries connected at the fork with 2 switches.................................
4.6 Optional equipment: 2 lipo batteries connected at the fork with 4 switches.................................
4.7 Optional equipment: Lead acid batteries at klickfix connector..................................................... 10
11
12
5. Instruction capacity display............................................................................................................. 13
6. Change of tyres................................................................................................................................. 14
7.0 Error search......................................................................................................................................
7.1 Brake contact…............................................................................................................................... 14
15
8. Technical Facts.................................................................................................................................. 16
9. Shipment…........................................................................................................................................ 16