
12
4.7 Optional equipment: Lead acid batteries
at klickfix connector at the fork
additional to lipo battery above with switch from lipo battery to lead
acid battery.
The capacity display is not working while lead acid battery is on duty.
The extra battery comes with an automatic charger 36V/1,4A with following performance:
3 steps charge control for fast an automatic charge
different electric tension for charge and maintenance
charging condition is shown by 3 LED‘s
reverse voltage protection
The charger is made for these batteries. Use only this charger to reach the maximum life span and to
avoid a damage of the battery.
For charging you can remove the batteries or you can keep it on the device.
Remove the plug at the battery and connect the plug from the charger to the battery.
Make sure that the charger is connected with the electric supply network. To charge the
battery completely full it will take approx. 3,5 hours.
If you are not using the battery for a longer time (winter season) store the
batteries completely charged and charge again every 2 month to avoid damage of
the batteries (deep discharge).
Please consider the different capacities at different temperatures:
40°C
102%; 25°C
100%; 0°C
85%; -15°C
65%
The plug at the controller case (see underneath) got modified. Therefore a click connection of the
plug is not possible again. The sense of this is to avoid a damage of the cable while removing the
battery.
Содержание Lipo Smart Para
Страница 7: ...7...
Страница 13: ...13 5 Instruction of the capacity display...