Stricker Lipo Smart Para, Руководство пользователя, Страница: 5 / 16

5
key position:
3.1 Light switch
(1)
To on and off the 36V LED lamp.
3.2 3-speedswitch (2)
To adjust the performance and speed limit of the bike. Level 1 (50%), level 2 (75%)
and level 3 (100%) of the maximal engine performance.
3.3 LED temperature display of engine temperature
Since the 1th of june 2015, the control boxes are equipped with a LED temperature display.
If the Lipo Smart has a LED in the control box but is without a temperature sensor in the motor, the
LED has no function.
•
Is a coil temperature in the motor (hub) of 150C° reached, the LED lights up.
•
If the LED lights up, the speed must be reduced and the manual mode should be increasingly
used.
•
If the LED doesn´t stop lightning, the handbike needs to be stopped until the engine has
cooled and the light goes out.
picture 5: on picture 6: off