36
Electronics & USB Adapter
●
You may not reconstruct, self-repair, or disassemble the Endoscope. This can damage the
device.
●
Maintenance, modifications, and repairs may only be carried out by the manufacturer, a
professional workshop appointed by the manufacturer, or a similarly qualified person.
●
Check the device from time to time for damage. Never use the device if it shows signs of
damage.
●
Only use a USB adapter 5V dc output (not included in the package) to load the battery. Another
adapter with the wrong specifications may cause malfunction and/or damage.
●
To prevent damage to the adapter and/or the Endoscope, make sure your power mains socket
supplies the correct power supply for the USB adapter.
●
The mains socket must be located near the device and easily accessible.
●
Always remove the USB adapter from the wall socket when the device is not in use, the battery is
not being charged, and before cleaning.
●
Never force the plug of your USB adapter into a mains socket; if it does not fit easily into the
mains socket, stop using it. Always make sure that the plug of your USB adapter is properly
connected to the mains socket.
●
It is normal for the USB adapter to feel a little warm; however, a loose fit between the mains
socket and the plug of the USB adapter can cause overheating and deformation of the plug.
Contact a qualified electrician to replace the loose or worn mains socket.
●
To disconnect the USB adapter, grasp the adapter housing and pull the adapter out of the mains
socket.
●
If the power fails during the operation, turn off the device immediately and pull the USB adapter
from the mains socket.
●
If there’s smoke, fire, or a strange odor or noise coming from your device, you should turn off
both the device and the circuit breaker or fuse box’s main switch. Contact the manufacturer, a
professional workshop appointed by the manufacturer, or a similarly qualified person before
using the device again.
●
For safety reasons, always disconnect the USB adapter in the event of a thunderstorm.
