Strend Pro VA-WC79P, Инструкция по эксплуатации

Страница: 30 / 31

EMPTYING THE TANK DURING OPERATION
- Once the max. fill level (mark) of the dirt water tank is reached, please empty the tank.
- Turn off the appliance.
- Pull off the lock of the dirt water tank and empty the tank.
- Close the closure of the wastewater tank.
FINISH UP YOUR WORK/CLEAN APPLIANCE
- Turn off the appliance.
- Unlock the suction nozzle first and remove it from the base appliance.
- Clean the rubber lips of the suction nozzle under running water.
- Pull out the outlet plug to empty the dirt water/If there is too many foam bubble or muddy water, please
shake the water tank to flush it then outlet the dirty water.
CAUTION! Risk of injury! The basic appliance contains electrical components. Do not clean this under
running water!
- Empty the tank and rinse with clear water. Close the tank again.
- Let the cleaned appliance dry prior to assembly.
- Charge the battery.
STORING THE APPLIANCE
- Store the appliance upright in a dry room.
TROUBLESHOOTING
Machine does not start
• Check the charge/operations display:
- No signal or slowly blinking signal: Charge the
battery.
- With a rapidly blinking signal: Inform your dealer.
Streaks while cleaning
• Clean the pull -off lip.
• Reverse the used pull -off lip:
- Pull the silicone squeegee to the side.
- Wet the squeegee in the area of the curve with
water or detergent.
- Slide the silicone squeegee back in the holder in
reverse order.
• Replace the pull -off lip if necessary:
- If both edges are worn after turning the silicone
squeegee around, a new silicone squeegee is
required.
- Replace silicone squeegee as described above.
• Adjust the dosing of cleaning solution.
Water is leaking from the air louvers • Empty the dirt water tank (max. 50 ml content).
PREPARING FOR DISPOSAL
REMOVING THE BATTERY
Note: The battery is not replaceable. At the end of the device lifetime, you should remove all batteries
before disposing of the item.
CAUTION! Risk of injury by splintering! Do not break device force-fully.
- Undo the screws and open the housing.