EN
SHARPENING KNIVES
1. Install the knife and scissor sharpener module.
2. Switch the sharpener on by pressing the on/off switch into the on position “I”.
3. Lower the handle end of the knife into the sharpening slot.
4. Once the blade touches the sharpening wheel, draw the blade lightly across the grinding wheel until
completely removed.
5. Insert the second side of the blade into the opposite sharpening slot and repeat step 3.
6. Repeat sharpening each side until a clean, sharp edge is achieved.
SHARPENING SCISSORS
Note:
Before sharpening any scissors make sure that they are suitable for sharpening. Most exchangeable
blade scissors are not suitable for sharpening.
