EN
CHISEL AND BLADE SHARPENER
1. Install the chisel and blade sharpener module.
2. Position the chisel or blade on the blade rest. The magnets will hold the blade in position.
3. Loosen the adjustable angle knob and adjust the angle to match the existing bevelled angle on the tool.
4. Turn on the sharpener by pressing the on/off switch to the on position “I”.
5. Slide the blade rest back and forth across the sharpening wheel with light steady pressure.
6. Gradually lower the blade down the blade rest until the tool is sharpened.
Note:
When sharpening narrow chisels or blades, place the narrow tool guide onto the blade rest to act as
a spacer and sharpen as above
