EN
- Do not plug or unplug the heater from the electrical outlet with a wet hand.
- Keep the Power Cord and heater away from heated surfaces.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
- The heater must not be located immediately below a socket-outlet.
- This heater is filled with a precise quantity of special oil. Repairs requiring opening of the oil container are
only to be made by the manufacturer or his service agent who should be contacted if there is an oil leak.
- When scrapping the heater, follow the regulations concerning the disposal of oil.
- The heater should not be used in a room, of which the floor area is less than 5 m
2
.
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer
may cause fire, electric shock, or injury to persons.
CAUTION — Some parts of this product can become very hot and cause burns.
Particular attention
has to
be given where children and vulnerable people are present.
PARTS IDENTIFICATION
1. Thermal Control Switch
2. Power Setting Switch
3. Indicator Light
4. Carry handle
5. Cord Storage
6. Front Cover
7. Radiator Fins
8. Castor Wheels
THIS MODEL HAS THREE LEVELS OF OVER HEAT PROTECTION
8
4
2
1
3
6
5
Quantity
Castor
wheels
2
Wing Nut
2
Arc-shaped
Bracket
2
7
2.
Automatic thermal cut-out by Kick temperature control KSD301
1.
Automatic thermal cut-off by thermal control switch
Switches off the heater in the event of overheating or malfunction and resets once the temperature drops
to a normal level.