EN
MAIN COMPONENTS
IMPORTANT SAFETY INSTRUCTION
Read all safety warnings and instructions.
Failure to heed warnings and follow instructions may result in
electric shock, fire and/or serious injury.
- Check before operation that the local power supply is the same as the specifications on the rating label.
- Check that the power cord or plug is damaged before each use.
- Check regularly that neither the cord nor the plug is damaged, and do not use the appliance if they are, or
if it has been dropped or damaged in any other way.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly
qualified person in order to avoid a hazard.
- Do not overload the power cord. Never use the cable to transport, lift or pull the plug out of the socket.
The cable must not be exposed to heat, oil, sharp edges or moving parts. Damaged or entangled cables
increase the risk of electric shock.
- Do not use machine in the combustible and explosive place, in case that the motor spark cause the fire.
- Keep machine away from strong sunlight and high temperature place in case plastic distorting. Never place
the appliance under water or immerse in water.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities or lack of experience and knowledge, unless they have been given supervison or
instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
- Always disconnect the ash vacuum cleaner from the power supply in case of any problems at work, before
any cleaning or maintenance, every move and end of operation! Never operate the vacuum cleaner if it is
damaged in any way.
- Immediately stop working if the ash vacuum cleaner starts to produce an abnormal sound or smell.
- Do not use a vacuum cleaner that can not be safely switched on and off by the control switch. Using
appliance with damaged switch is dangerous. It must be repaired by a certified service center.
- Before and after work, check, empty and clean the vacuum cleaner to prevent sedimentation of material
that could cause fire.
- Do not vacuum any soot or flammable substances.
Plastic hose
Handle
Suction hole
Cover
Container
Aluminium tube
Container lock tab
ON/OFF switch
