Plastic welding:
Mount on the reduction nozzle and welding foot on the pistol. The workpieces that you weld and the
welding wire must be of the same material. The weld point must be clean and free from grease. Gently
heat the two points of the weld until the consistency is melted. Be careful when working and remember
that the thermal difference between the molten and the liquid consistency of the plastic is small. Add the
welding wire and let it melt into the gap so as to make a uniform seam of the weld.
Shrinkage:
Mount on the reduction nozzle. Select the shrink foil hose diameter according to the workpiece. Heat the
shrink hose foil evenly.
Water pipe thawing:
Before heating, make sure it is a water pipe. The water pipelines are often not distinguished by the external
