This document contains proprietary and copyrighted information subject to change without notice. The information in this
document shall not be duplicated, used, or disclosed in whole or in part outside of MAI Media Group © 2015. Any distribution
of this material without the written consent of MAI Media Group is strictly prohibited.
battery. 12V is the recommended setting for normal vehicles when the StreetCam HD is
connected directly the vehicle’s battery to prevent the recorder from fully discharging the
battery.
■ Parking Mode
- When Auto Parking is selected, the system will switch into Parked mode after 10 minutes
of no vehicle movement.
- Motion Detection triggers event recording whenever the forward camera detects motion
while in Parked mode.
■ Speed Alarm
- This allows you to set a high speed threshold that will trigger an alarm when the system
detects the vehicle going faster than this value.
■ Type
- These settings allow you to select your speed format and vehicle type.
■ Time Synchronizarion
- This allows you to set the StreetCam HD’s system time.
- If the GPS module is attached then that time source will supersede the manual time
settings due to its increased accuracy.
- When this option is selected, the current time on your computer is saved onto the SD card.
When the SD card is inserted into the recorder, this timestamp is read and then applied.
***Be sure to insert the SD card right away when using this method because the longer the
delay between time stamping the SD card and applying it to the recorder, the more the
system time will be off.
Additional Info.
1. Warranty
- The product warranty for parts and labor is one year from the date of purchase.
- If the product malfunctions under normal use within the warranty period, you can call for
support. If it is determined that there is a hardware fault an RMA will be issued and the
product will be repaired or replaced.
- If the warranty period expires, repairs and services will incur a fee that will be quoted
