This document contains proprietary and copyrighted information subject to change without notice. The information in this
document shall not be duplicated, used, or disclosed in whole or in part outside of MAI Media Group © 2015. Any distribution
of this material without the written consent of MAI Media Group is strictly prohibited.
- Use the enclosed cable holders to organize cables.
*Connect the optional camera
- The auxiliary camera can be used by being connected to the CAM IN port. We
recommend to power off the main unit before connecting the second camera to the CAM IN
port.
Basic Information
1
How to Use
■ Power ON/OFF
- Check to make sure that the SD card is inserted into the unit.
- This product operates when vehicle starts or ignition is on.
- It begins recording after checking the SD card once the boot sequence is complete.
- The REC and GPS LED’s turn on following the above stages.
- The REC LED blinks in blue.
- GPS lamp is red before receiving GPS signal and it is blue while receiving a GPS signal.
- Depending on the environment, it may take between a few seconds to several minutes to
receive GPS signal blue status.
- The LCD screen automatically turns off one minute after recording begins. You can turn
the screen on again by tapping it.
- The recorder will beep and reboot to switch to single channel mode recording if the
