This document contains proprietary and copyrighted information subject to change without notice. The information in this
document shall not be duplicated, used, or disclosed in whole or in part outside of MAI Media Group © 2015. Any distribution
of this material without the written consent of MAI Media Group is strictly prohibited.
connecting cable for the rear camera is disconnected during operation.
- When reconnected, the unit will reboot to reactivate two channel recording mode.
(We recommend that you turn off the unit before reconnection.)
■ Normal Recording and Event Recording
- Normal recording begins with vehicle start-up and then the REC LED will blink blue.
- In normal recording mode, recordings are 1 minute in duration and are stored in the
NORMAL folder. If the allocated memory area is full while in normal or event recording
mode, the program will erase the oldest recorded data in those folders to allow the saving
of new files. The management is based on First-In First-Out (FIFO).
- In the case of an impact, the sensors will trigger the event mode with an alarm. The REC
LED blinks in red and the video data will be saved in the EVENT folder.
- An event file is 60 seconds in duration, 10 seconds before the point of impact and
afterwards a maximum of up to 45 seconds according to the settings.
- Recording time after an impact can be changed at MENU > System Setting > Shock
Sensor
∙Recording or via the PC based video viewer program.
- Sensitivity of shock sensor settings should be set differently according to vehicle type in
order to support correct event folder video storage.
(Go to MENU > System Settings> Shock Sensor∙Recording Settings to change the
sensitivity value.)
- EVENT folder content is overwritten when it is full.
- Sensitivity of Shock sensor, storage ratio of each folder or recording time for an event file
after an impact can also be set in Menu> System Settings> Shock sensor and recording
settings on the LCD screen.
■ Manual EVENT Recording
- The video is saved in the EVENT folder with an alarm press the manual button.
- Use the manual button when you would like to save scenes or when you witness an
accident to keep these videos separate in the Emergency folder.
- MENU mode is not available while EVENT or EMERGENCY recording is going on.
■ Real-time video check on the LCD
-
Each time you touch the LCD, Front > Rear screen is displayed on the LCD.
(In one channel mode, only the front camera view is displayed.)
Please always stop the vehicle before operating the LCD touch screen of the device.
■ Parking Surveillance Mode
- The ”Auto switching to Parking mode” option is selected by default and it automatically
places the unit in the “Parking Mode” once the vehicle does not move for longer than
10minutes after the last normal mode recording. The unit will automatically return to “Driving
Mode” once the unit registers movement such as starting up the vehicle.
*You are notified of the number of impact occurrences when the unit is in Parking mode in
order to enhance safety during Parking. The notice will disappear once you go to the MENU
to play the related impact file.
- In parking mode and while there is no impact, the system records 10 frames/second per
channel to save the SD card space and then returns to normal 30fps recording mode making
an EVENT file when it detects an impact or movement around the vehicle before returning to
parking mode again.
- The REC LED flashes in purple while the recorder is in Parking mode.
